We use soap to clean the entire time with us, but we have so little knowledge of how soap.soap a mixture of oils, fats and salt.There are also different types of bath soaps, such as soap, soap for the hands and liquid soap detergent. There are four processes for the manufacture of soap used to make soap: Casting (MP), Hot Process (HP), Cold Process and Rebatching. Melt Process.The difference in melting and casting and casting process as a process of hot and cold in comparison process that is not liquor is used in the process, thereby reducing the risk of transformation of a dangerous process is as simple as it chemical.

The melting of the soap on the basis of heat, adding elements such as color, odor, etc., and pouring the melt into molds to cool. Process.The cold cold process uses caustic soda, water and oil, melted and cooled to the left to 110 degrees F (43 ° C) prior to be mixed together.Care take care when handling caustic soda, and you should wear gloves and goggles and be an additional precautionary measure, not on fumes.After ingredients are mixed together and the mixture is continuously mixed and stirred to a thin layer of pudding as substance.

After the mixture is well mixed, and the breath of cast is in the process create molds.What cold is important that the ratio and the ratio of liquor to other ingredients well. Hot Process.The process must be measured using the heat from the chemical reaction of lye, fats and oils will form combination.Once greater the soap, hot water is a process molds.In the exact solution concentration, the mixture is not necessary "Rebatching . Is basically the same thing as melt and pour, and is often made of ingredients that can not be added to add to very high temperatures, soap making, .

any process is used to make soap, it is always important even aware of the dangers of manipulation of substances chemicals and must be properly dressed in a security tool.

Possibly related posts: (automatically generated)